How To Fit A Shower Tray With Legs: A Step-by-step Guide For A Hassle-free Bathroom Remodel

Transforming your bathroom into a luxurious haven requires careful attention to detail, and installing a shower tray with legs is a crucial step. Whether you’re renovating an existing bathroom or creating a new one, understanding how to fit a shower tray with legs is essential for a seamless and functional installation. This comprehensive guide will walk you through the process, ensuring a successful and long-lasting result.

1. Choose the Right Shower Tray:

The foundation of a well-fitted shower tray lies in selecting the appropriate one for your bathroom. Consider factors such as the size, shape, and material of the shower tray. Ensure it complements the overall design and functionality of your bathroom while providing a comfortable showering experience.

2. Prepare the Shower Area:

Before embarking on the installation process, prepare the shower area to ensure a smooth and efficient installation. Remove any existing shower tray, fittings, or fixtures. Ensure the floor is level and free of debris. Additionally, provide adequate ventilation to prevent moisture buildup.

3. Install the Shower Waste:

The shower waste serves as the drainage system for your shower tray. Install the waste according to the manufacturer’s instructions. Ensure it is securely connected to the drainage pipe and properly sealed to prevent leaks.

4. Position the Shower Tray:

Carefully position the shower tray in the designated area, ensuring it aligns with the waste outlet. Use a spirit level to check for level installation in both directions. Adjust the position as needed to achieve a perfectly level surface.

5. Apply Adhesive or Sealant:

Depending on the type of shower tray, you may need to apply adhesive or sealant to secure it in place. For acrylic shower trays, use a silicone sealant. For fiberglass or stone resin shower trays, use a polyurethane adhesive. Apply the adhesive or sealant according to the manufacturer’s instructions.

6. Install the Shower Tray Legs:

Once the adhesive or sealant has been applied, install the shower tray legs. These legs provide support and stability to the shower tray. Ensure they are evenly distributed and securely attached to the shower tray. Adjust the legs to achieve the desired height for your shower tray.

7. Connect the Plumbing:

Connect the shower tray waste to the drainage system using a flexible hose. Ensure the connection is secure and watertight. Additionally, connect the shower mixer to the water supply, following the manufacturer’s instructions.

8. Test the Shower Tray:

Before sealing the shower tray permanently, conduct a water test to check for leaks. Turn on the shower and observe the connections for any signs of water seepage. If you notice any leaks, tighten the connections or apply additional sealant as needed.

9. Seal the Shower Tray:

Once you’re satisfied with the water test results, seal the shower tray permanently. Use a silicone sealant to seal the joints between the shower tray and the wall. Apply the sealant evenly and smoothly to create a watertight seal. Allow the sealant to cure according to the manufacturer’s instructions.

10. Install the Shower Enclosure:

If you’re installing a shower enclosure, follow the manufacturer’s instructions to secure it to the shower tray and wall. Ensure the enclosure is properly aligned and leveled. Use a spirit level to check for accuracy.

Wrapping Up:

Installing a shower tray with legs requires careful planning and attention to detail. By following the steps outlined in this guide, you can ensure a successful and long-lasting installation. Enjoy the satisfaction of a perfectly fitted shower tray that enhances the functionality and beauty of your bathroom.

Information You Need to Know

1. What tools do I need to install a shower tray with legs?

• Spirit level
• Screwdriver
• Utility knife
• Tape measure
• Adjustable wrench
• Safety goggles
• Gloves

2. How do I choose the right adhesive or sealant for my shower tray?

• For acrylic shower trays, use a silicone sealant.
• For fiberglass or stone resin shower trays, use a polyurethane adhesive.

3. How do I ensure a watertight seal between the shower tray and the wall?

• Apply a silicone sealant evenly and smoothly to the joints between the shower tray and the wall.
• Allow the sealant to cure according to the manufacturer’s instructions.

4. What should I do if I notice a leak during the water test?

• Tighten the connections or apply additional sealant as needed.
• Conduct another water test to ensure the leak has been fixed.

5. How do I maintain my shower tray with legs?

• Clean the shower tray regularly with a mild detergent and water.
• Avoid using harsh chemicals or abrasive cleaners.
• Inspect the sealant around the shower tray periodically for signs of wear or damage.