How To Replace Moen Tub Spout With Diverter

Replacing a Moen tub spout with a diverter is a relatively simple task that can be completed in about an hour. With the right tools and materials, you can easily update your bathroom faucet and add a new level of functionality.

Necessary Tools and Materials:

• Adjustable wrench
• Phillips head screwdriver
• Flat head screwdriver
• Pliers
• Teflon tape
• New Moen tub spout with diverter
• Rags
• Bucket

Step 1: Turn Off the Water Supply

The first step is to turn off the water supply to the tub. This is typically done by closing the valves located under the sink or behind the bathtub. If you have a single-handle faucet, you can also turn off the water supply by turning the handle to the “off” position.

Step 2: Remove the Old Tub Spout

Once the water supply is turned off, you can remove the old tub spout. To do this, use an adjustable wrench to loosen the nut that holds the spout in place. Once the nut is loose, you can unscrew the spout by hand.

Step 3: Clean the Tub Spout Area

Once the old tub spout is removed, you should clean the area where the new spout will be installed. Use a rag and some cleaner to remove any dirt or debris. You should also apply a small amount of Teflon tape to the threads of the new spout.

Step 4: Install the New Tub Spout

To install the new tub spout, simply screw it onto the threads of the tub spout shank. Use an adjustable wrench to tighten the nut until it is snug.

Step 5: Install the Diverter

The diverter is a small device that allows you to switch the water flow from the tub spout to the shower head. To install the diverter, simply insert it into the hole in the tub spout. Use a screwdriver to tighten the screw that holds the diverter in place.

Step 6: Test the New Tub Spout and Diverter

Once the new tub spout and diverter are installed, you should test them to make sure they are working properly. Turn on the water supply and check for any leaks. You should also test the diverter to make sure it is switching the water flow correctly.

Step 7: Enjoy Your New Tub Spout and Diverter

Once you have tested the new tub spout and diverter and made sure they are working properly, you can enjoy your updated bathroom faucet. The new spout and diverter will add a new level of functionality and style to your bathroom.

Tips for Replacing a Moen Tub Spout with Diverter

• If you are not comfortable working with plumbing, you can hire a professional plumber to replace the tub spout and diverter for you.
• Be sure to purchase a new tub spout and diverter that is compatible with your Moen faucet.
• When tightening the nut that holds the tub spout in place, be careful not to overtighten it. This could damage the spout or the threads on the tub spout shank.
• If you have any questions about how to replace a Moen tub spout with a diverter, you can consult the manufacturer’s instructions or contact a professional plumber.

Key Points: Upgrading Your Bathroom with a New Moen Tub Spout and Diverter

Replacing a Moen tub spout with a diverter is a relatively simple task that can be completed in about an hour. With the right tools and materials, you can easily update your bathroom faucet and add a new level of functionality. By following the steps outlined in this guide, you can ensure that the job is done correctly and that you are enjoying your new tub spout and diverter in no time.

What People Want to Know

1. What is the purpose of a diverter on a tub spout?

A diverter is a small device that allows you to switch the water flow from the tub spout to the shower head. This is useful when you want to take a shower or rinse off the tub.

2. How do I know if my Moen tub spout needs to be replaced?

There are a few signs that your Moen tub spout may need to be replaced. These include:

• The spout is leaking.
• The spout is cracked or damaged.
• The spout is difficult to turn or adjust.
• The spout is outdated or no longer matches your bathroom décor.

3. What are the benefits of replacing my Moen tub spout with a new one?

There are several benefits to replacing your Moen tub spout with a new one. These include:

• Improved water flow and pressure.
• A new look for your bathroom.
• Increased functionality, such as the addition of a diverter.
• Peace of mind knowing that your tub spout is in good condition and will not leak or cause damage.