Quick and easy: how to replace the water pump on an lg front load washer yourself
What To Know
- Replacing the water pump on an LG front load washer is a relatively straightforward task that can be completed in under an hour.
- Signs of a faulty water pump include water leaking from the bottom of the washer, unusual noises during washing or draining, and the washer failing to circulate or drain water.
- Can I replace the water pump myself, or do I need to call a professional.
If your LG front load washer is experiencing issues with water circulation or drainage, it may be time to replace the water pump. This guide will provide you with step-by-step instructions on how to replace the water pump on your LG front load washer.
Tools and Materials
Before you begin, gather the following tools and materials:
- New water pump for LG front load washer
- Phillips head screwdriver
- Flathead screwdriver
- Bucket or pan
- Towels
- Flashlight
Safety Precautions
- Unplug the washer from the power outlet.
- Turn off the water supply to the washer.
- Wear gloves and safety glasses.
Step 1: Remove the Front Panel
- Open the washer door and remove the two screws on the inside of the door frame.
- Grip the front panel at the top and pull it towards you to detach it from the washer body.
- Set the front panel aside.
Step 2: Locate the Water Pump
- Locate the water pump assembly at the bottom of the washer, behind the front panel.
- It is typically held in place by screws or bolts.
Step 3: Disconnect the Hoses
- Use a flathead screwdriver to loosen the hose clamps on the water pump hoses.
- Carefully remove the hoses from the water pump.
- Place a bucket or pan under the hoses to catch any remaining water.
Step 4: Remove the Water Pump
- Use a Phillips head screwdriver to remove the screws or bolts holding the water pump in place.
- Carefully lift the water pump out of the washer.
Step 5: Install the New Water Pump
- Align the new water pump with the mounting points in the washer.
- Secure the water pump with the screws or bolts.
- Make sure the hoses are properly connected to the water pump.
Step 6: Reattach the Hoses
- Tighten the hose clamps on the water pump hoses using a flathead screwdriver.
- Ensure that the hoses are secure and will not leak.
Step 7: Reinstall the Front Panel
- Align the front panel with the washer body and push it in place until it snaps into position.
- Secure the front panel with the screws removed earlier.
Troubleshooting Tips
- If the washer still does not circulate or drain water after replacing the pump, check for any blockages in the hoses or drain line.
- Ensure that the water supply is turned on and that the hoses are not kinked.
- If the problem persists, contact a qualified appliance repair technician.
Summary
Replacing the water pump on an LG front load washer is a relatively straightforward task that can be completed in under an hour. By following the steps outlined in this guide, you can restore your washer to optimal working condition.
Frequently Asked Questions
Q: How do I know if my LG front load washer‘s water pump needs to be replaced?
A: Signs of a faulty water pump include water leaking from the bottom of the washer, unusual noises during washing or draining, and the washer failing to circulate or drain water.
Q: Can I replace the water pump myself, or do I need to call a professional?
A: Replacing the water pump is a DIY-friendly task that can be completed with basic tools and knowledge. However, if you are not comfortable working on appliances, it is advisable to contact a qualified technician.
Q: How often should I replace the water pump on my LG front load washer?
A: The lifespan of a water pump varies depending on usage and maintenance. Generally, it is recommended to replace the water pump every 5-7 years or when it starts showing signs of failure.
