Why Is My Kohler Toilet Not Level? – Causes And Solutions

Have you noticed that your Kohler toilet is sitting unevenly on the floor, causing it to wobble or rock? If so, you’re not alone. A toilet that’s not level can be a major annoyance and can even lead to leaks and other problems.

In this blog post, we’ll explore the various reasons why your Kohler toilet might not be level and provide step-by-step instructions on how to fix it. Whether you’re a novice DIYer or a seasoned plumber, this guide will help you get your toilet back to a level position.

Common Causes of an Unlevel Kohler Toilet

Before you start troubleshooting, it’s important to understand the most common causes of an unlevel toilet. These include:

• Uneven floor: The floor under the toilet may not be level, which can cause the toilet to sit unevenly.
• Incorrectly installed toilet flange: The toilet flange is the metal ring that secures the toilet to the floor. If it’s not installed properly, it can cause the toilet to lean or rock.
• Damaged or missing toilet bolts: The toilet bolts are what hold the toilet in place. If they’re damaged or missing, the toilet can become loose and unlevel.
• Worn-out toilet wax ring: The toilet wax ring is a seal that prevents water from leaking between the toilet and the flange. If it’s worn out or damaged, it can allow the toilet to move around and become unlevel.

How to Fix an Unlevel Kohler Toilet

Once you’ve identified the cause of your unlevel toilet, you can begin to fix it. Here are the steps involved:

1. Check the Floor for Level

Use a level to check the floor under the toilet. If it’s not level, you’ll need to level it before you can proceed. You can do this by using a self-leveling compound or by shimming the floor with shims.

2. Inspect the Toilet Flange

Remove the toilet bolts and lift the toilet off the flange. Inspect the flange for any damage or cracks. If the flange is damaged, you’ll need to replace it.

3. Install the Toilet Bolts

If the toilet flange is in good condition, insert the toilet bolts into the holes in the flange. Tighten the bolts until the toilet is snug against the flange.

4. Install the Toilet Wax Ring

Apply a new toilet wax ring to the bottom of the toilet. Line up the toilet over the flange and lower it into place.

5. Tighten the Toilet Bolts

Once the toilet is in place, tighten the toilet bolts until the toilet is secure. Do not overtighten the bolts, as this can damage the toilet or the flange.

6. Check the Level

Use a level to check the toilet to make sure it’s level. If it’s not, adjust the toilet bolts until it is.

7. Reconnect the Water Supply

Reconnect the water supply to the toilet. Turn on the water and check for any leaks.

Prevention Tips

To prevent your Kohler toilet from becoming unlevel in the future, follow these tips:

• Install the toilet on a level floor.
• Use a high-quality toilet flange.
• Tighten the toilet bolts securely.
• Replace the toilet wax ring every few years.

Wrapping Up: Troubleshooting an Unlevel Kohler Toilet

Fixing an unlevel Kohler toilet is a relatively simple task that can be completed in a few hours. By following the steps outlined in this guide, you can get your toilet back to a level position and prevent future problems.

FAQ

1. Why does my Kohler toilet keep rocking?

A rocking toilet is usually caused by loose toilet bolts. Tighten the bolts until the toilet is secure.

2. How do I know if my toilet flange is damaged?

Signs of a damaged toilet flange include cracks, rust, and corrosion. If you see any of these signs, you’ll need to replace the flange.

3. Can I use a regular wax ring on a Kohler toilet?

Yes, you can use a regular wax ring on a Kohler toilet. However, Kohler recommends using a wax ring that is specifically designed for Kohler toilets.