No more leaky taps: the ultimate guide to removing a peerless faucet handle without allen screws

Faced with the perplexing challenge of removing a Peerless faucet handle that seems to lack a visible Allen screw? Fret no more! This comprehensive guide will lead you through a step-by-step process, unlocking the secrets of this enigmatic task.

Identifying the Hidden Screw

1. Inspect the Handle:

Thoroughly examine the handle for any concealed screws. Look for small indentations or grooves where a screw might be hidden.

2. Check the Base:

Flip the handle upside down and inspect the base for any screws. They may be located near the edges or in the center.

3. Pry Open the Base:

If you still can’t find the screw, carefully pry open the base of the handle using a thin, flat-head screwdriver. Be cautious not to damage the handle.

Removing the Handle

1. Locate the Screw:

Once you’ve identified the hidden screw, use an Allen wrench to loosen it. If you don’t have an Allen wrench, you can use a small flat-head screwdriver.

2. Remove the Screw:

Gently turn the screw counterclockwise until it is completely removed. Be careful not to strip the screw.

3. Pull Off the Handle:

Once the screw is removed, gently pull the handle straight up and off the faucet. If it’s stuck, wiggle it slightly to loosen it.

Reinstalling the Handle

1. Align the Handle:

Position the handle on the faucet, ensuring that it is aligned correctly.

2. Insert the Screw:

Insert the screw into the hole in the handle and tighten it using an Allen wrench or flat-head screwdriver. Do not overtighten.

3. Test the Handle:

Turn the handle on and off to ensure that it is working properly.

Troubleshooting

1. Handle Won’t Budge:

If the handle is stuck, try applying a small amount of penetrating oil to the screw and letting it sit for a few minutes before removing it.

2. Stripped Screw:

If you strip the screw, you can try using a screw extractor or drilling out the screw and replacing it with a new one.

3. Handle Leaks:

If the handle leaks after reinstalling, tighten the screw further or replace the washer behind the handle.

Summary:

Removing a Peerless faucet handle without a visible Allen screw is a simple task once you know the secrets. By following the steps outlined in this guide, you can effortlessly tackle this plumbing challenge and restore your faucet to perfect working order.

Information You Need to Know

1. What if there’s no visible screw?

Inspect the handle carefully for hidden screws or pry open the base to reveal it.

2. Can I use a flat-head screwdriver instead of an Allen wrench?

Yes, you can use a small flat-head screwdriver if you don’t have an Allen wrench.

3. How do I prevent the screw from stripping?

Use the correct size Allen wrench and apply steady pressure while turning the screw.

4. What if the handle is stuck?

Apply penetrating oil to the screw and let it sit before removing it.

5. Why does the handle leak after reinstalling?

The screw may not be tight enough or the washer behind the handle may need to be replaced.