Replace your simmons shower valve in minutes: the ultimate guide
What To Know
- Locate the main water shut-off valve and turn it clockwise to shut off the water supply to the shower.
- Use a screwdriver to remove the screws holding the trim ring in place.
- Turn on the shower and adjust the handle to ensure the water flows properly and the temperature is controlled correctly.
Replacing a Symmons shower valve may seem daunting, but with the right tools and knowledge, it’s a task you can tackle yourself. This comprehensive guide will walk you through every step of the process, ensuring a successful and hassle-free replacement.
Tools and Materials
Before you begin, gather the following tools and materials:
- Screwdriver (flathead and Phillips)
- Adjustable wrench
- Pliers
- Teflon tape
- New Symmons shower valve
- Replacement cartridge (if needed)
Step 1: Shut Off Water Supply
- Locate the main water shut-off valve and turn it clockwise to shut off the water supply to the shower.
Step 2: Remove the Handle
- Use a flathead screwdriver to pry off the handle cap.
- Remove the handle screws and pull the handle straight off.
Step 3: Remove the Escutcheon Plate
- Use a screwdriver to remove the screws holding the escutcheon plate in place.
- Carefully pull the escutcheon plate away from the wall.
Step 4: Remove the Trim Ring
- Use a screwdriver to remove the screws holding the trim ring in place.
- Pull the trim ring straight out.
Step 5: Remove the Valve Stem
- Use an adjustable wrench to loosen the packing nut.
- Pull the valve stem straight out.
Step 6: Inspect and Replace the Cartridge (Optional)
- If the valve stem is damaged, you may need to replace the cartridge.
- Pull the cartridge straight out of the valve body.
- Insert the new cartridge into the valve body.
Step 7: Install the New Valve Stem
- Apply Teflon tape to the threads of the new valve stem.
- Insert the valve stem into the valve body.
- Tighten the packing nut using an adjustable wrench.
Step 8: Reinstall the Trim Ring
- Insert the trim ring into the valve body.
- Secure it with the screws.
Step 9: Reinstall the Escutcheon Plate
- Align the escutcheon plate with the valve body.
- Secure it with the screws.
Step 10: Reinstall the Handle
- Insert the handle onto the valve stem.
- Secure it with the screws.
- Snap on the handle cap.
Step 11: Turn On Water Supply
- Open the main water shut-off valve to restore water supply to the shower.
Step 12: Test the Valve
- Turn on the shower and adjust the handle to ensure the water flows properly and the temperature is controlled correctly.
Finishing Up: Tips for Success
- Use Teflon tape on all threaded connections to prevent leaks.
- Tighten all screws and nuts securely, but do not overtighten.
- If you encounter any leaks, tighten the connections further.
- If the valve still leaks, contact a licensed plumber.
FAQ
Q: How long does it take to replace a Symmons shower valve?
A: The replacement time can vary depending on the complexity of the job, but it typically takes between 30 minutes to 2 hours.
Q: Can I replace the valve myself if I have no plumbing experience?
A: Yes, you can replace the valve yourself if you have basic DIY skills. However, if you are not comfortable working with plumbing, it’s best to contact a licensed plumber.
Q: How often should I replace my Symmons shower valve?
A: The lifespan of a Symmons shower valve can vary depending on usage and water quality. However, it’s generally recommended to replace the valve every 5 to 10 years.