Save Money on Plumbing Bills: How to Use a Sewer Jetter Kit with Your Pressure Washer
What To Know
- A sewer jetter kit is an attachment for a pressure washer that utilizes a high-pressure water stream to blast away debris and clogs from drains and sewers.
- Using a sewer jetter kit with a pressure washer is a highly effective way to clear clogged drains and sewers.
- The distance you can insert the hose will depend on the length of the hose and the size of the drain.
Are you struggling with clogged drains and backed-up sewers? A sewer jetter kit can be a lifesaver for clearing these blockages quickly and effectively. This comprehensive guide will walk you through the steps on how to use a sewer jetter kit with your pressure washer, ensuring a successful and hassle-free cleaning experience.
Understanding Sewer Jetter Kits
A sewer jetter kit is an attachment for a pressure washer that utilizes a high-pressure water stream to blast away debris and clogs from drains and sewers. These kits typically include a flexible hose, a nozzle, and a specialized wand or gun. The high-pressure water creates a powerful force that can dislodge even the most stubborn blockages.
Safety Precautions
Before using a sewer jetter kit, it is crucial to follow these safety precautions:
- Wear protective gear: Always wear gloves, safety glasses, and earplugs to protect yourself from water spray and debris.
- Secure the pressure washer: Ensure that the pressure washer is firmly secured in a stable position to prevent it from tipping over.
- Inspect the hose: Check the hose for any cracks or leaks before using it.
- Clear the work area: Remove any obstacles or debris from the work area to prevent tripping or accidents.
Step-by-Step Guide
1. Connect the Sewer Jetter Kit
Attach the sewer jetter hose to the pressure washer‘s outlet. Tighten the connection securely to prevent leaks.
2. Insert the Nozzle
Select the appropriate nozzle for the type of blockage you are dealing with. There are different nozzles available, such as forward-facing, rear-facing, and rotating nozzles. Insert the nozzle into the end of the hose.
3. Position the Wand
Position the wand or gun at the entrance of the drain or sewer line. Make sure that the nozzle is pointing in the direction of the blockage.
4. Start the Pressure Washer
Turn on the pressure washer and gradually increase the pressure until you reach the desired cleaning power.
5. Insert the Hose
Slowly insert the hose into the drain or sewer line while applying pressure. The high-pressure water will begin to blast away the blockage.
6. Guide the Hose
As you insert the hose, guide it carefully to follow the path of the drain or sewer line. This will ensure that all areas are thoroughly cleaned.
7. Clear the Blockage
Continue inserting the hose and applying pressure until you feel the blockage has been cleared. You may need to repeat the process several times for stubborn blockages.
8. Rinse the Line
Once the blockage has been cleared, rinse the drain or sewer line with clean water to remove any remaining debris.
Troubleshooting
Pressure is Too Low
- Check the pressure washer’s settings and ensure it is set to the correct pressure.
- Inspect the hose for leaks or kinks that may be restricting water flow.
Nozzle is Clogged
- Remove the nozzle and clean it with a small brush or compressed air.
- Replace the nozzle if it is damaged or worn.
Hose is Not Feeding Properly
- Check the hose for any twists or bends that may be hindering its progress.
- Apply a lubricant to the hose to make it easier to insert.
Final Note
Using a sewer jetter kit with a pressure washer is a highly effective way to clear clogged drains and sewers. By following the steps outlined in this guide and adhering to the safety precautions, you can successfully tackle these blockages and maintain a clean and functional drainage system.
Questions You May Have
Q: What type of pressure washer should I use with a sewer jetter kit?
A: Most sewer jetter kits require a pressure washer with at least 2,500 PSI (pounds per square inch) and a flow rate of 4 gallons per minute (GPM).
Q: How far can I insert the hose into the drain?
A: The distance you can insert the hose will depend on the length of the hose and the size of the drain. Generally, you can insert the hose up to 100 feet into a drain.
Q: Can I use a sewer jetter kit on all types of drains?
A: Sewer jetter kits are suitable for most types of drains, including kitchen sinks, bathroom drains, and outdoor drains. However, they are not recommended for delicate drains or drains with sharp bends.
