Save Time And Money: Learn How To Install Your Kohler Elongated Toilet At Home

Are you ready to embark on a rewarding DIY project that will enhance your bathroom’s comfort and style? Look no further than installing a Kohler elongated toilet. With its spacious design and superior craftsmanship, this toilet offers an unparalleled combination of functionality and elegance. In this comprehensive guide, we will provide you with a step-by-step walkthrough of the installation process, ensuring a successful outcome for even the most novice DIY enthusiasts.

Materials You Will Need

Before you begin, gather the following essential materials:

• Kohler elongated toilet
• Toilet flange
• Toilet wax ring
• Adjustable wrench
• Hacksaw
• Level
• Plumber’s putty
• Toilet seat and lid

Step 1: Prepare the Installation Area

1. Turn off the water supply to the toilet and flush to empty the tank and bowl.
2. Disconnect the water supply line from the old toilet.
3. Remove the old toilet by unbolting it from the floor and lifting it off the flange.
4. Clean the floor and flange thoroughly to remove any debris.

Step 2: Install the Toilet Flange

1. If the existing toilet flange is damaged or missing, you will need to install a new one.
2. Place the toilet flange over the drainpipe and secure it with bolts.
3. Use a level to ensure that the flange is level and flush with the floor.

Step 3: Apply the Toilet Wax Ring

1. Remove the paper backing from the toilet wax ring.
2. Center the wax ring on the toilet flange, pressing down firmly to create a seal.

Step 4: Set the Toilet on the Flange

1. Carefully lift the toilet and slowly lower it onto the flange, aligning the bolts with the holes in the toilet base.
2. Hand-tighten the bolts until they are snug.

Step 5: Secure the Toilet

1. Use an adjustable wrench to tighten the bolts further, but do not overtighten.
2. Reconnect the water supply line to the toilet.
3. Turn on the water supply and check for leaks.

Step 6: Install the Toilet Seat and Lid

1. Align the toilet seat with the toilet bowl and insert the bolts through the holes.
2. Secure the bolts with nuts and washers, tightening them until the seat is firmly in place.

Step 7: Seal the Base

1. Apply a bead of plumber’s putty around the base of the toilet where it meets the floor.
2. Smooth the putty with your finger to create a watertight seal.

Troubleshooting Tips

• If there is a leak around the base of the toilet, tighten the bolts further or replace the wax ring.
• If the toilet wobbles, adjust the bolts or use shims to level the toilet.
• If the water supply line leaks, replace the washer or tighten the connection.

Questions You May Have

1. What is the difference between an elongated and round toilet bowl?
An elongated toilet bowl is longer and more oval-shaped than a round toilet bowl, providing more legroom and comfort.

2. How do I know if my toilet flange is damaged?
Look for cracks, rust, or loose bolts. If you are unsure, it is best to replace the flange.

3. Can I install a Kohler elongated toilet on a round flange?
No, a Kohler elongated toilet requires an elongated toilet flange for proper installation.