How To Replace Your Kohler Bathtub Spout In Just 5 Easy Steps!
What To Know
- Replacing a Kohler bathtub spout is a relatively straightforward task that can be completed in a few hours with the right tools and materials.
- If the new spout is a pull-out model, attach the hose to the spout and connect it to the water supply under the sink.
- Replacing a Kohler bathtub spout is a simple and rewarding task that can be completed in a few hours.
Replacing a Kohler bathtub spout is a relatively straightforward task that can be completed in a few hours with the right tools and materials. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber and ensure a professional-looking finish.
Materials You’ll Need:
- New Kohler bathtub spout
- Adjustable wrench
- Plumber’s tape
- Rags
- Screwdriver (optional)
Step 1: Turn Off Water Supply
The first step is to turn off the water supply to your bathtub. This is typically done by closing the shut-off valves located under the sink or behind the bathtub. If you cannot find the shut-off valves, you may need to turn off the main water supply to your home.
Step 2: Remove the Old Spout
Using an adjustable wrench, loosen the nut that connects the old spout to the bathtub. Once the nut is loose, you can remove the spout by pulling it straight out. If the spout is stuck, you may need to use a screwdriver to pry it loose.
Step 3: Clean the Connection Area
Once the old spout is removed, clean the connection area with a rag to remove any debris or old sealant. Apply a few wraps of plumber’s tape to the threads of the new spout.
Step 4: Install the New Spout
Insert the new spout into the connection area and tighten the nut using the adjustable wrench. Do not overtighten the nut, as this could damage the spout or the bathtub.
Step 5: Turn On Water Supply
Once the new spout is installed, turn on the water supply and check for leaks. If you notice any leaks, tighten the nut further until the leak stops.
Step 6: Finish the Installation
If the new spout is a pull-out model, attach the hose to the spout and connect it to the water supply under the sink. If the new spout has a diverter, install it according to the manufacturer’s instructions.
Step 7: Enjoy Your New Spout
Congratulations! You have now successfully replaced your Kohler bathtub spout. Enjoy your new, updated bathtub.
In a nutshell:
Replacing a Kohler bathtub spout is a simple and rewarding task that can be completed in a few hours. By following these step-by-step instructions, you can save money and ensure a professional-looking finish.
Common Questions and Answers
Q: What tools do I need to replace a Kohler bathtub spout?
A: You will need an adjustable wrench, plumber’s tape, rags, and a screwdriver (optional).
Q: How long will it take to replace a Kohler bathtub spout?
A: It should take approximately 1-2 hours to replace a Kohler bathtub spout.
Q: What is the cost to replace a Kohler bathtub spout?
A: The cost to replace a Kohler bathtub spout will vary depending on the model of spout you choose. However, you can expect to pay between $50 and $200 for a new spout.
Q: Can I replace a Kohler bathtub spout myself?
A: Yes, replacing a Kohler bathtub spout is a relatively straightforward task that can be completed by most homeowners.
Q: What should I do if my new Kohler bathtub spout is leaking?
A: If your new Kohler bathtub spout is leaking, tighten the nut further until the leak stops. If the leak persists, you may need to call a plumber.
