10 Easy Steps To Make Your Own Floor Drain – Save Time And Money!

Floor drains are an essential part of any bathroom or kitchen, but they can be surprisingly tricky to install. If you’re not careful, you can end up with a drain that leaks, clogs, or even backs up. That’s why it’s important to follow the steps in this guide carefully.

Materials You’ll Need

Before you start, you’ll need to gather the following materials:

• Floor drain
• PVC pipe
• PVC fittings
• Cement
• Primer
• Cleaner
• Measuring tape
• Level
• Pencil
• Hacksaw
• Screwdriver
• Wrench

Step 1: Choose the Right Floor Drain

The first step is to choose the right floor drain for your needs. There are many different types of floor drains available, so it’s important to do your research and find one that will work well for your specific application.

Step 2: Cut the PVC Pipe

Once you have chosen a floor drain, you will need to cut the PVC pipe to the correct length. To do this, measure the distance from the floor drain to the wall. Then, add 6 inches to this measurement and cut the PVC pipe to this length.

Step 3: Assemble the PVC Fittings

Next, you will need to assemble the PVC fittings. The fittings will connect the PVC pipe to the floor drain. To assemble the fittings, apply a thin layer of cement to the inside of the fitting and then push the PVC pipe into the fitting. Hold the pipe in place for a few seconds until the cement sets.

Step 4: Install the Floor Drain

Once the PVC fittings are assembled, you can install the floor drain. To do this, place the floor drain in the hole in the floor and then tighten the screws to secure it in place.

Step 5: Connect the PVC Pipe to the Wall

Next, you will need to connect the PVC pipe to the wall. To do this, apply a thin layer of cement to the inside of the PVC pipe and then push the pipe into the fitting on the wall. Hold the pipe in place for a few seconds until the cement sets.

Step 6: Test the Floor Drain

Once the floor drain is installed, you will need to test it to make sure it is working properly. To do this, pour a bucket of water into the drain and then check for leaks. If there are any leaks, you will need to tighten the screws or replace the cement.

Step 7: Clean the Floor Drain

Once the floor drain is working properly, you will need to clean it regularly to prevent clogs. To clean the drain, remove the grate and then pour a cup of vinegar down the drain. Let the vinegar sit in the drain for a few minutes and then flush the drain with hot water.

Troubleshooting

If you are having problems with your floor drain, there are a few things you can do to troubleshoot the problem.

• Check for leaks. If there are any leaks, you will need to tighten the screws or replace the cement.
• Clean the drain. If the drain is clogged, you will need to remove the grate and then pour a cup of vinegar down the drain. Let the vinegar sit in the drain for a few minutes and then flush the drain with hot water.
• Replace the floor drain. If the floor drain is damaged, you will need to replace it.

Popular Questions

• How often should I clean my floor drain?

You should clean your floor drain at least once a month to prevent clogs.

• What is the best way to clean my floor drain?

The best way to clean your floor drain is to remove the grate and then pour a cup of vinegar down the drain. Let the vinegar sit in the drain for a few minutes and then flush the drain with hot water.

• What should I do if my floor drain is clogged?

If your floor drain is clogged, you can try to unclog it by pouring a cup of vinegar down the drain. Let the vinegar sit in the drain for a few minutes and then flush the drain with hot water. If the clog is still not cleared, you may need to call a plumber.