How To Remove Your Zurn Floor Drain In 10 Seconds! (don’t Try This At Home)

Removing a Zurn floor drain can be a daunting task, but it’s one that can be accomplished with the right tools and know-how. In this comprehensive guide, we will walk you through the step-by-step process of how to remove a Zurn floor drain, ensuring a smooth and efficient removal.

Tools and Materials Required

• Adjustable wrench
• Channel locks
• Screwdriver
• Putty knife or flathead screwdriver
• Rags or towels
• Bucket or bowl
• Safety glasses
• Gloves

Safety Precautions

Before you begin, always take the necessary safety precautions. Wear safety glasses and gloves to protect yourself from any debris or sharp edges. Ensure the area is well-ventilated and avoid inhaling any fumes.

Step-by-Step Removal Guide

1. Shut Off Water Supply

Locate the water supply valve that feeds the floor drain and shut it off. This will prevent any water from flowing into the drain while you’re working.

2. Remove the Drain Cover

Use the screwdriver to remove the screws that hold the drain cover in place. Once the screws are removed, lift the cover off.

3. Remove the Drain Body

Using the channel locks, grip the drain body and turn it counterclockwise to loosen it. Once it’s loose, lift the drain body out of the floor.

4. Remove the Washer

Inside the drain body, you’ll find a washer. Use the putty knife or flathead screwdriver to pry the washer loose.

5. Clean the Drain Hole

Use a rag or towel to clean any debris or sealant from the drain hole. This will ensure a proper seal when you install the new drain.

6. Apply Sealant

Apply a bead of sealant around the base of the new drain body. This will help prevent leaks.

7. Insert the Drain Body

Insert the new drain body into the drain hole and turn it clockwise to tighten it. Make sure it’s seated properly and snug.

8. Replace the Washer

Place the washer over the drain body and press it into place.

9. Replace the Drain Cover

Replace the drain cover and tighten the screws to secure it.

10. Turn On Water Supply

Turn the water supply valve back on and check for any leaks. If there are any leaks, tighten the drain body or washer further.

Tips for Success

• If the drain body is stuck, tap it gently with a hammer to loosen it.
• Be careful not to overtighten the drain body, as this can damage the drain hole.
• If you have any questions or concerns, consult a licensed plumber.

Key Points: Masterful Floor Drain Removal

Congratulations! You have successfully removed a Zurn floor drain. By following these step-by-step instructions and taking the necessary safety precautions, you’ve ensured a smooth and efficient removal. Remember, if you encounter any difficulties, don’t hesitate to seek professional help.

Frequently Asked Questions

1. How can I prevent leaks after removing the floor drain?

• Make sure to apply a bead of sealant around the base of the new drain body.
• Tighten the drain body and washer securely.

2. What should I do if the drain body is stuck?

• Tap it gently with a hammer to loosen it.
• Use penetrating oil to lubricate the threads.

3. Can I replace the floor drain with a different type?

• Yes, but you may need to modify the drain hole and purchase an adapter kit.