Replace your tub faucet and shower in 10 easy steps: the ultimate diy guide
What To Know
- Replacing a tub faucet and shower may seem like a daunting task, but with this comprehensive guide, you’ll be equipped with the knowledge and confidence to tackle this home improvement project like a pro.
- Roll a small amount of plumber’s putty into a rope and apply it to the bottom of the new faucet’s base.
- How long does it take to replace a tub faucet and shower.
Replacing a tub faucet and shower may seem like a daunting task, but with this comprehensive guide, you’ll be equipped with the knowledge and confidence to tackle this home improvement project like a pro.
Tools and Materials You’ll Need
Before you embark on this adventure, gather the following tools and materials:
- Adjustable wrench
- Basin wrench
- Channel-lock pliers
- Plumber’s putty
- Teflon tape
- New tub faucet and showerhead
- Towel
- Safety glasses
Step 1: Shut Off Water Supply
Safety first! Locate the water supply valves under the sink or behind the tub and turn them off to prevent any unexpected water bursts.
Step 2: Remove the Old Faucet
Using the basin wrench, loosen the nuts that secure the old faucet to the tub. Be careful not to overtighten or damage the nuts. Once loose, remove the old faucet by gently pulling it straight up.
Step 3: Clean the Faucet Seat
Remove any old plumber’s putty or debris from the faucet seat using a towel. This will ensure a snug fit for the new faucet.
Step 4: Apply Plumber’s Putty
Roll a small amount of plumber’s putty into a rope and apply it to the bottom of the new faucet’s base. This will create a watertight seal.
Step 5: Install the New Faucet
Align the new faucet over the faucet seat and push it down firmly. Use the adjustable wrench to tighten the nuts until they are snug. Make sure not to overtighten.
Step 6: Replace the Showerhead
Unscrew the old showerhead by hand or using channel-lock pliers. Apply Teflon tape to the threads of the new showerhead and screw it onto the shower arm. Tighten it securely.
Step 7: Turn On Water Supply
Turn on the water supply valves and check for any leaks. If you find any, tighten the nuts or adjust the plumber’s putty as needed.
Enjoy Your New Tub and Shower
Congratulations! You’ve successfully replaced your tub faucet and shower. Now, sit back, relax, and enjoy a refreshing shower or soak in your newly updated tub.
Troubleshooting Tips
- Leaking Faucet: Check the nuts and connections for tightness. Adjust the plumber’s putty or Teflon tape if necessary.
- Showerhead Dripping: Clean the showerhead nozzles with a vinegar solution. If that doesn’t resolve the issue, replace the showerhead.
- Low Water Pressure: Inspect the aerator on the faucet and showerhead for clogs. Clean or replace them as needed.
Quick Answers to Your FAQs
Q: Can I replace the tub faucet and shower myself?
A: Yes, with the right tools and instructions, you can tackle this project yourself.
Q: How long does it take to replace a tub faucet and shower?
A: The time it takes will vary depending on your skill level and the complexity of the installation. However, most people can complete this project in a few hours.
Q: Is it cheaper to replace the tub faucet and shower myself?
A: Yes, hiring a plumber can be more expensive than doing it yourself. However, if you’re not confident in your abilities, it’s best to seek professional help.
Q: What type of tub faucet and shower should I choose?
A: Consider your budget, style preferences, and water pressure when selecting a tub faucet and shower.
Q: How often should I replace my tub faucet and shower?
A: Every 10-15 years is a good rule of thumb, depending on usage and maintenance.