Exposed to the elements? fix your leaky outdoor faucet handle today!
What To Know
- Replacing an exterior faucet handle is a relatively simple task that can be completed in a few hours.
- Replacing an exterior faucet handle is a simple task that can be completed in a few hours.
- The cost to replace an exterior faucet handle can vary depending on the type of handle and the materials used.
Replacing an exterior faucet handle is a relatively simple task that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber and ensure that your faucet is functioning properly.
Materials You’ll Need
Before you begin, gather the following materials:
- New exterior faucet handle
- Adjustable wrench
- Screwdriver
- Gloves (optional)
Step-by-Step Instructions
1. Turn Off the Water Supply
Locate the water supply valve that controls the faucet and turn it off. This valve is typically located under the sink or in the basement.
2. Remove the Old Handle
Using an adjustable wrench, loosen the nut that secures the old handle to the faucet stem. Once the nut is loose, pull the handle straight off.
3. Remove the Stem
Behind the handle, you will see a packing nut that seals the stem to the faucet body. Use an adjustable wrench to loosen the packing nut and remove it. Then, use a screwdriver to remove the stem.
4. Inspect the Stem and Seat
Examine the stem and seat for any signs of wear or damage. If either component is damaged, it should be replaced.
5. Install the New Stem
Apply a thin layer of plumber’s grease to the threads of the new stem. Then, insert the stem into the faucet body and tighten the packing nut. Be sure not to overtighten the packing nut, as this can damage the stem.
6. Install the New Handle
Place the new handle on the stem and tighten the nut that secures it. Again, be careful not to overtighten the nut.
7. Turn On the Water Supply
Turn the water supply valve back on and check for leaks. If you notice any leaks, tighten the packing nut or the nut that secures the handle until the leak stops.
Tips for a Successful Replacement
- Wear gloves to protect your hands from sharp edges.
- If you are replacing a stem, be sure to use the correct type of stem for your faucet.
- If you are having difficulty removing the old handle or stem, use a penetrating oil to loosen the threads.
- If you are not comfortable replacing the faucet handle yourself, call a plumber for assistance.
Troubleshooting
Why is my new faucet handle leaking?
There are a few reasons why your new faucet handle may be leaking. The most common cause is a loose packing nut. Tighten the packing nut until the leak stops. Another possibility is that the stem is damaged. If this is the case, you will need to replace the stem.
Why is my faucet handle stiff?
If your faucet handle is stiff, it may be because the packing nut is too tight. Loosen the packing nut slightly until the handle moves smoothly.
Why is my faucet handle loose?
If your faucet handle is loose, it may be because the nut that secures it is loose. Tighten the nut until the handle is secure.
Wrapping Up
Replacing an exterior faucet handle is a simple task that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber and ensure that your faucet is functioning properly.
Basics You Wanted To Know
How much does it cost to replace an exterior faucet handle?
The cost to replace an exterior faucet handle can vary depending on the type of handle and the materials used. However, most handles cost between $10 and $50.
How long does it take to replace an exterior faucet handle?
Replacing an exterior faucet handle typically takes less than an hour.
Can I replace an exterior faucet handle myself?
Yes, replacing an exterior faucet handle is a relatively simple task that can be completed by most do-it-yourselfers.