Diy plumbing: how to reverse faucet handle direction (even for beginners)
What To Know
- Reversing the direction of your faucet handle is a simple and straightforward task that can be completed in a matter of minutes.
- Reversing the direction of your faucet handle is a simple task that can be completed in a few minutes.
- By following the steps outlined above, you can enjoy the convenience and ease of use that comes with having your faucet handle move in the direction you prefer.
Are you tired of fighting with your faucet handle, struggling to turn it in the right direction? If so, you’re in luck! Reversing the direction of your faucet handle is a simple and straightforward task that can be completed in a matter of minutes.
Why Reverse the Faucet Handle Direction?
There are several reasons why you might want to reverse the direction of your faucet handle:
- Personal preference: Some people simply prefer the opposite direction of handle movement.
- Ergonomics: Reversing the direction can make it easier to operate the faucet, especially for those with limited mobility.
- Aesthetic reasons: In some cases, reversing the handle direction can improve the overall appearance of your bathroom or kitchen.
Materials You’ll Need
Before you begin, gather the following materials:
- Phillips head screwdriver
- Adjustable wrench
- New cartridge (if necessary)
Step-by-Step Guide
1. Turn Off the Water Supply
Start by turning off the water supply to the faucet. This is usually done by closing the shut-off valves located under the sink.
2. Remove the Faucet Handle
Using a Phillips head screwdriver, remove the screw that is holding the faucet handle in place. Pull the handle straight up to remove it.
3. Remove the Cartridge
If your faucet has a cartridge, you will need to remove it. To do this, use an adjustable wrench to loosen the retaining nut that is holding the cartridge in place. Once the nut is loose, pull the cartridge straight out.
4. Reverse the Cartridge
Take the cartridge and turn it 180 degrees. Reinsert the cartridge into the faucet body and tighten the retaining nut.
5. Reinstall the Faucet Handle
Align the faucet handle with the stem and push it down until it clicks into place. Secure the handle with the screw that you removed earlier.
6. Turn on the Water Supply
Turn on the water supply and check for leaks. If there are any leaks, tighten the retaining nut or replace the cartridge.
Troubleshooting Tips
If the Handle is Loose
If the handle is loose after you have reversed the direction, tighten the screw that is holding it in place.
If the Water Flows in the Wrong Direction
If the water flows in the wrong direction after you have reversed the direction, you may have installed the cartridge incorrectly. Remove the cartridge and reinstall it in the correct direction.
If You Have a Two-Handle Faucet
If you have a two-handle faucet, you will need to reverse the direction of both handles. Follow the same steps as outlined above for each handle.
Final Thoughts
Reversing the direction of your faucet handle is a simple task that can be completed in a few minutes. By following the steps outlined above, you can enjoy the convenience and ease of use that comes with having your faucet handle move in the direction you prefer.
Frequently Asked Questions
Q: Why is my faucet handle so hard to turn?
A: The handle may be hard to turn if the cartridge is worn or damaged. Replacing the cartridge should resolve the issue.
Q: Can I reverse the direction of my faucet handle without replacing the cartridge?
A: In some cases, you may be able to reverse the direction of the handle without replacing the cartridge. However, this is not always possible, and it is recommended to replace the cartridge if you are having any issues.
Q: Is it safe to reverse the direction of my faucet handle?
A: Yes, it is safe to reverse the direction of your faucet handle. However, it is important to follow the steps outlined above carefully to avoid any damage to the faucet.