10 Easy Steps To Install New Toilet Bolts Like A Pro!
What To Know
- Locate the water supply line behind the toilet and turn off the valve to prevent water from flowing into the toilet.
- Use a socket wrench with a 7/16-inch socket to unscrew the nuts holding the toilet bolts in place.
- Align the new toilet bolts with the holes in the toilet flange and insert them into the holes.
Replacing worn-out toilet bolts is a crucial task that ensures a secure and stable toilet installation. By following this comprehensive guide, you’ll learn how to install new toilet bolts like a pro, ensuring a leak-free and reliable bathroom experience.
Tools and Materials You’ll Need
Before you begin, gather the following tools and materials:
- New toilet bolts
- Adjustable wrench
- Socket wrench with 7/16-inch socket
- Plumber’s putty
- Rubber or wax toilet gasket
- Utility knife
Step 1: Shut Off the Water Supply
Locate the water supply line behind the toilet and turn off the valve to prevent water from flowing into the toilet.
Step 2: Disconnect the Water Supply Line
Using an adjustable wrench, disconnect the water supply line from the toilet fill valve.
Step 3: Remove the Old Toilet Bolts
Use a socket wrench with a 7/16-inch socket to unscrew the nuts holding the toilet bolts in place. Remove the old bolts and discard them.
Step 4: Apply Plumber’s Putty
Roll out a pea-sized amount of plumber’s putty and form it into a rope. Wrap the rope around the base of the new toilet bolts, ensuring that it covers the threads.
Step 5: Insert the New Toilet Bolts
Align the new toilet bolts with the holes in the toilet flange and insert them into the holes. Hand-tighten the nuts onto the bolts.
Step 6: Install the Toilet Gasket
Place the rubber or wax toilet gasket over the flange and press it down firmly to create a seal.
Step 7: Tighten the Toilet Bolts
Using the socket wrench, tighten the nuts on the toilet bolts securely. Avoid overtightening, as this can crack the toilet or damage the bolts.
Step 8: Reconnect the Water Supply Line
Reattach the water supply line to the toilet fill valve and turn on the water supply.
Step 9: Check for Leaks
Flush the toilet and check for any leaks around the base of the toilet. If you notice any leaks, tighten the toilet bolts further.
Wrapping Up: A Secure and Leak-Free Toilet
Congratulations! You’ve successfully installed new toilet bolts and ensured a secure and leak-free toilet. By following these steps, you can maintain a clean and functional bathroom for years to come.
Information You Need to Know
Q: How often should I replace toilet bolts?
A: Toilet bolts should be replaced every 5-7 years or when they become rusty or damaged.
Q: Can I use bolts from a different toilet?
A: No, toilet bolts are designed to fit specific toilet models. Using bolts from a different toilet may not provide a secure fit.
Q: What if I overtighten the toilet bolts?
A: Overtightening the toilet bolts can crack the toilet or damage the bolts. Tighten the bolts until they are secure, but do not apply excessive force.
Q: Can I use a sealant instead of plumber’s putty?
A: While sealants can be used, plumber’s putty is the preferred material for sealing toilet bolts. It provides a more reliable and watertight seal.
Q: What is the purpose of the toilet gasket?
A: The toilet gasket creates a watertight seal between the toilet and the flange, preventing leaks. It also helps to stabilize the toilet.