How To Reset Your Zurn Automatic Flush Valve In 3 Easy Steps!

Zurn automatic flush valves are renowned for their efficiency and convenience in commercial restrooms. However, occasionally, they may require a reset to ensure optimal performance. This blog post provides a step-by-step guide to help you reset your Zurn automatic flush valve effortlessly.

Understanding the Reset Mechanism

Zurn automatic flush valves are typically equipped with a manual override button or a solenoid valve. The manual override button is usually located on the top of the valve, while the solenoid valve is situated at the base. Both methods allow you to manually flush the toilet and reset the valve.

Step-by-Step Reset Instructions

Using the Manual Override Button

1. Locate the Manual Override Button: It is typically a small, red button positioned on the top of the valve.
2. Press and Hold: Firmly press and hold the button for a few seconds.
3. Release and Flush: Release the button and observe the toilet flushing. This action will manually activate the flush cycle and reset the valve.

Using the Solenoid Valve

1. Identify the Solenoid Valve: Look for a small, cylindrical device located at the base of the valve.
2. Close the Water Supply: Turn off the water supply to the toilet using the shut-off valve behind the toilet.
3. Disconnect the Solenoid Valve: Use a wrench to disconnect the solenoid valve from the water supply line.
4. Reconnect the Solenoid Valve: Reattach the solenoid valve to the water supply line and tighten the connection.
5. Turn On the Water Supply: Open the water supply valve and flush the toilet to activate the reset.

Troubleshooting Common Issues

Valve Not Flushing Automatically

• Check the Power Source: Ensure that the power supply to the valve is working.
• Inspect the Sensor: Clean any debris or obstructions from the sensor eye.
• Adjust the Sensitivity: Adjust the sensitivity setting on the valve to ensure it detects motion appropriately.

Valve Flushing Too Often

• Reduce the Sensitivity: Adjust the sensitivity setting on the valve to prevent false activations.
• Check for Leaks: Inspect the valve for any leaks that may be causing premature flushing.
• Clean the Sensor: Remove any dirt or debris that may be interfering with the sensor’s accuracy.

Valve Not Flushing at All

• Check the Manual Override Button: Ensure that the manual override button is not stuck or obstructed.
• Test the Solenoid Valve: Use a multimeter to test the solenoid valve for continuity.
• Replace the Valve: If the solenoid valve or the manual override button is faulty, consider replacing the entire valve.

Maintaining Your Zurn Automatic Flush Valve

• Clean the Sensor Regularly: Remove any debris or dirt from the sensor eye with a soft cloth.
• Adjust the Sensitivity as Needed: Fine-tune the sensitivity setting to optimize the valve’s performance.
• Inspect the Valve Periodically: Check for leaks, loose connections, or any other potential issues.

Wrap-Up: Empowering You with Reset Confidence

By following these step-by-step instructions, you can confidently reset your Zurn automatic flush valve and restore its optimal functionality. Remember to troubleshoot any issues promptly and maintain the valve regularly to ensure its continued efficiency.

Basics You Wanted To Know

Q: How often should I reset my Zurn automatic flush valve?
A: Typically, it is not necessary to reset the valve regularly. However, if you experience any issues or performance degradation, a reset may be beneficial.

Q: Can I use a different type of flush valve on my Zurn toilet?
A: It is recommended to use a Zurn-compatible flush valve for optimal performance and compatibility.

Q: What are the benefits of using an automatic flush valve?
A: Automatic flush valves offer improved hygiene, water conservation, and reduced maintenance costs compared to manual flush valves.