How To Remove An Old Toilet Flange In 10 Minutes (diy Guide)

An old toilet flange can be a real pain to remove, but it’s a necessary step when replacing a toilet. In this blog post, we’ll walk you through the process of removing an old toilet flange step-by-step. We’ll also provide some tips and tricks to make the job easier.

Safety First

Before you begin, it’s important to take some safety precautions. Wear gloves and safety glasses to protect yourself from any sharp edges or debris. Also, be sure to turn off the water supply to the toilet before you start working.

Tools You’ll Need

• Adjustable wrench
• Hacksaw
• Putty knife
• Hammer
• Chisel

Step-by-Step Instructions

1. Remove the Toilet

The first step is to remove the toilet. To do this, simply turn the water supply off and then flush the toilet to empty the tank. Next, disconnect the water supply line from the toilet. Finally, unbolt the toilet from the floor and lift it off of the flange.

2. Remove the Wax Ring

Once the toilet is removed, you’ll need to remove the wax ring. The wax ring is a seal that prevents water from leaking between the toilet and the flange. To remove the wax ring, simply use a putty knife to cut around the edge of the ring and then pull it off.

3. Remove the Bolts

Once the wax ring is removed, you’ll need to remove the bolts that hold the flange in place. To do this, simply use an adjustable wrench to loosen the nuts on the bolts. Once the nuts are loose, you can remove the bolts by hand.

4. Break the Seal

Once the bolts are removed, you’ll need to break the seal between the flange and the floor. To do this, simply use a hammer and chisel to chip away at the grout around the flange. Be careful not to damage the floor or the flange itself.

5. Remove the Flange

Once the seal is broken, you can remove the flange by simply pulling it up off of the floor. If the flange is stuck, you can use a pry bar to help you remove it.

6. Clean the Floor

Once the flange is removed, you’ll need to clean the floor. To do this, simply use a broom and dustpan to remove any debris. You can also use a damp cloth to wipe down the floor.

7. Install the New Flange

Once the floor is clean, you can install the new flange. To do this, simply place the flange on the floor and then secure it with the bolts. Be sure to tighten the bolts securely.

Tips and Tricks

• If the flange is made of plastic, you can use a hacksaw to cut it into pieces. This will make it easier to remove.
• If the flange is stuck, you can use a pry bar to help you remove it.
• If the floor is damaged, you may need to repair it before you install the new flange.

Wrap-Up: Replacing Your Toilet Flange

Replacing a toilet flange is a relatively simple task that can be completed in a few hours. By following the steps outlined in this blog post, you can easily remove an old toilet flange and install a new one.

What People Want to Know

1. How do I know if my toilet flange needs to be replaced?

There are a few signs that your toilet flange may need to be replaced. These signs include:

• The toilet is leaking water
• The toilet is rocking or moving
• The toilet is not level

2. How much does it cost to replace a toilet flange?

The cost to replace a toilet flange will vary depending on the type of flange you choose and the labor costs in your area. However, you can expect to pay between $50 and $200 for the entire project.

3. Can I replace a toilet flange myself?

Yes, you can replace a toilet flange yourself. However, it is important to follow the steps outlined in this blog post carefully to avoid any damage to your toilet or floor.