How To Remove Non-slip Bathtub Strips: A Step-by-step Guide
What To Know
- With the strip softened, use a plastic scraper or putty knife to gently scrape away the non-slip material.
- Whether you opt for a bare surface or apply a new non-slip solution, you’ll have a safe and comfortable bathing experience.
- You can use a hot water bottle or a bowl of hot water to soften the non-slip strip before scraping it away.
Are you tired of those old, worn-out non-slip strips in your bathtub? Do they make it difficult to clean and maintain your tub? If so, it’s time to learn how to remove bathtub non slip strips and restore your tub to its former glory. In this comprehensive guide, we’ll walk you through the necessary steps to safely and effectively remove these stubborn strips, leaving your bathtub smooth and slip-free.
Materials You’ll Need
Before you begin, gather the following materials:
- Safety glasses
- Gloves
- Heat gun or hair dryer
- Plastic scraper or putty knife
- Rubbing alcohol
- Clean cloths or paper towels
Safety First
Before starting any work, put on your safety glasses and gloves to protect yourself from potential hazards.
Step 1: Heat the Non-Slip Strip
Using a heat gun or hair dryer, apply heat to the non-slip strip in sections. As the strip heats up, it will soften and become easier to remove.
Step 2: Scrape Away the Strip
With the strip softened, use a plastic scraper or putty knife to gently scrape away the non-slip material. Hold the scraper at a low angle to avoid damaging the bathtub surface.
Step 3: Remove Adhesive Residue
Once the non-slip strip is removed, you may notice some adhesive residue left on the bathtub. To remove this, apply rubbing alcohol to a clean cloth and gently rub the area. The alcohol will dissolve the adhesive, making it easy to wipe away.
Step 4: Clean the Bathtub
Use a clean cloth or paper towel to wipe down the bathtub and remove any remaining debris. Rinse the tub thoroughly with water and dry it with a clean towel.
Step 5: Apply a Non-Slip Solution (Optional)
If you still desire a non-slip surface in your bathtub, consider applying a non-slip solution. These solutions are typically clear or white and can be applied with a brush or roller. Follow the manufacturer’s instructions for application and drying time.
Tips for Removing Stubborn Strips
- If the non-slip strip is particularly stubborn, you may need to reheat it multiple times before it softens enough to scrape away.
- Be patient and work slowly to avoid damaging the bathtub surface.
- If you encounter any areas where the adhesive is difficult to remove, apply more rubbing alcohol and let it sit for a few minutes before scraping.
The Bottom Line: Bathtub Bliss
With the non-slip strips removed, you can enjoy a smooth, easy-to-clean bathtub once again. Whether you opt for a bare surface or apply a new non-slip solution, you’ll have a safe and comfortable bathing experience.
FAQ
Q: Can I use a razor blade to remove non-slip strips?
A: No, using a razor blade is not recommended as it can damage the bathtub surface.
Q: What if I don’t have a heat gun or hair dryer?
A: You can use a hot water bottle or a bowl of hot water to soften the non-slip strip before scraping it away.
Q: How often should I clean my bathtub to prevent non-slip strips from becoming worn or discolored?
A: Regular cleaning with a mild household cleaner will help maintain the condition of your non-slip strips.
