Save Time And Money: How To Install A Twist N Set Toilet Flange Yourself!

A Twist ‘n Set toilet flange is a type of toilet flange that is designed to be installed quickly and easily, without the need for any special tools or materials. It consists of two parts: a base flange that is secured to the floor, and a top flange that is attached to the base flange and can be rotated to adjust the height of the toilet bowl.

Why Install a Twist ‘n Set Toilet Flange?

There are several advantages to using a Twist ‘n Set toilet flange, including:

• Ease of installation: Twist ‘n Set flanges are designed to be installed quickly and easily, even by DIYers with little plumbing experience.
• Adjustability: The top flange can be rotated to adjust the height of the toilet bowl, making it easy to level the toilet and ensure a proper seal.
• Durability: Twist ‘n Set flanges are made from high-quality materials that are resistant to corrosion and wear, ensuring a long service life.

Materials Needed

Before you begin installing a Twist ‘n Set toilet flange, you will need the following materials:

• Twist ‘n Set toilet flange
• Toilet bowl
• Toilet wax ring
• Adjustable wrench
• Hacksaw
• Measuring tape
• Level
• Pencil

Step-by-Step Installation Guide

1. Prepare the Floor

Begin by removing the old toilet and cleaning the floor thoroughly. Make sure the floor is level and free of any debris or obstructions.

2. Measure and Mark the Floor

Use a measuring tape to locate the center of the toilet drain pipe. Mark the center of the pipe on the floor using a pencil.

3. Cut the Base Flange

Use a hacksaw to cut the base flange to the desired length. The length of the flange will depend on the thickness of the floor.

4. Secure the Base Flange

Place the base flange over the drain pipe and secure it to the floor using the bolts provided. Make sure the flange is level and centered over the pipe.

5. Attach the Top Flange

Place the top flange over the base flange and rotate it to the desired height. The top of the flange should be flush with the finished floor level.

6. Adjust the Height

Once the top flange is in place, use an adjustable wrench to tighten the bolts that secure it to the base flange. This will adjust the height of the toilet bowl.

7. Level the Toilet

Place the toilet bowl on the flange and level it using a level. Use shims or spacers under the toilet bowl as needed to ensure a level installation.

8. Apply the Wax Ring

Apply a toilet wax ring to the bottom of the toilet bowl. The wax ring will create a seal between the toilet bowl and the flange, preventing leaks.

9. Set the Toilet

Carefully set the toilet bowl onto the flange and press down firmly to seat it in place.

10. Connect the Water Supply

Connect the water supply line to the toilet bowl fill valve. Make sure the connection is secure and there are no leaks.

11. Flush the Toilet

Flush the toilet to test for leaks. If there are any leaks, tighten the bolts that secure the toilet bowl to the flange or adjust the wax ring as needed.

Troubleshooting Tips

• Toilet wobbles: If the toilet wobbles, it may be because the flange is not properly secured to the floor. Tighten the bolts that secure the flange to the floor and level the toilet again.
• Leaks: If there are leaks around the base of the toilet, it may be because the wax ring is not properly seated. Remove the toilet and reapply the wax ring, making sure to press down firmly on the toilet bowl to seat it in place.
• Toilet is too high or too low: If the toilet is too high or too low, it may be because the top flange is not adjusted to the correct height. Use an adjustable wrench to loosen the bolts that secure the top flange to the base flange and adjust the height as needed.

In a nutshell: The Benefits of a Twist ‘n Set Toilet Flange

Installing a Twist ‘n Set toilet flange is a quick and easy way to ensure a secure and leak-free toilet installation. By following the steps outlined in this guide, you can easily install a Twist ‘n Set toilet flange and enjoy the benefits of a properly installed toilet.

Frequently Discussed Topics

Q: Can I install a Twist ‘n Set toilet flange on a concrete floor?
A: Yes, you can install a Twist ‘n Set toilet flange on a concrete floor. However, you will need to use a concrete drill bit to create holes for the bolts that secure the flange to the floor.

Q: What is the difference between a Twist ‘n Set toilet flange and a regular toilet flange?
A: A Twist ‘n Set toilet flange is designed to be installed quickly and easily, without the need for any special tools or materials. It consists of two parts: a base flange that is secured to the floor, and a top flange that is attached to the base flange and can be rotated to adjust the height of the toilet bowl. A regular toilet flange is a single piece that is secured to the floor using bolts.

Q: How long does it take to install a Twist ‘n Set toilet flange?
A: Installing a Twist ‘n Set toilet flange typically takes less than 30 minutes.