Avoid Costly Repairs! Learn How To Take Out Your Kohler Bathtub Drain Today!

If you’re experiencing drainage issues with your Kohler bathtub, removing and cleaning the drain is often the first step towards resolving the problem. While it may seem like a daunting task, taking out a Kohler bathtub drain is relatively easy with the right tools and instructions. This guide will walk you through the process step-by-step, ensuring a successful and hassle-free repair.

Safety Precautions

Before you begin, it’s essential to take the necessary safety precautions:

• Turn off the water supply to the bathtub.
• Wear safety gloves to protect your hands.
• Use a flashlight to illuminate the work area if necessary.

Tools You’ll Need

To take out a Kohler bathtub drain, you will need the following tools:

• Adjustable wrench or pliers
• Screwdriver
• Bucket or towel
• Hairpin or drain snake (optional)

Removing the Drain Cover

1. Locate the drain cover: It is usually a circular or square plate in the center of the bathtub drain.
2. Remove the screws: Using a screwdriver, remove the screws that hold the drain cover in place.
3. Lift the cover: Gently lift the drain cover to expose the drain assembly.

Disconnecting the Drain Pipe

1. Loosen the slip nut: Using an adjustable wrench or pliers, loosen the slip nut that connects the drain pipe to the drain body.
2. Disconnect the pipe: Carefully pull the drain pipe away from the drain body.
3. Place a bucket or towel underneath: To catch any water or debris that may leak out.

Removing the Drain Body

1. Unscrew the drain body: Using an adjustable wrench or pliers, unscrew the drain body counterclockwise.
2. Lift out the drain body: Once loose, lift the drain body out of the bathtub.

Cleaning the Drain Assembly

1. Remove any debris: Use a hairpin or drain snake to remove any hair or other debris from the drain assembly.
2. Clean the drain body: Wash the drain body thoroughly with warm water and a mild detergent.
3. Clean the drain pipe: Flush the drain pipe with hot water to remove any remaining debris.

Reinstalling the Drain Assembly

1. Insert the drain body: Place the clean drain body back into the bathtub drain hole.
2. Tighten the drain body: Using an adjustable wrench or pliers, tighten the drain body clockwise.
3. Reconnect the drain pipe: Slide the drain pipe back onto the drain body and tighten the slip nut.

Reinstalling the Drain Cover

1. Place the drain cover: Align the drain cover over the drain assembly.
2. Secure the screws: Using a screwdriver, tighten the screws to secure the drain cover in place.

Troubleshooting

If you encounter any issues while taking out your Kohler bathtub drain, here are some troubleshooting tips:

• Stuck drain body: If the drain body is stuck, try using a lubricant or penetrating oil to loosen it.
• Leaking drain pipe: If the drain pipe leaks when reconnected, ensure the slip nut is tightened properly.
• Slow drainage: If the bathtub continues to drain slowly after cleaning the drain, there may be a blockage further down the drain line.

Wrapping Up

Taking out a Kohler bathtub drain is a simple and straightforward task that can be completed in a matter of minutes. By following the steps outlined in this guide, you can effectively remove and clean the drain assembly, resolving any drainage issues you may be experiencing. Remember, if you encounter any difficulties or have any further questions, do not hesitate to consult a qualified plumber.

Popular Questions

Q: How often should I clean my Kohler bathtub drain?
A: It is recommended to clean your Kohler bathtub drain every few months or as needed to prevent clogs.

Q: What is the best way to remove hair from a bathtub drain?
A: Using a hairpin or drain snake is an effective method for removing hair from a bathtub drain.

Q: Can I use chemical drain cleaners to unclog my Kohler bathtub drain?
A: It is generally not recommended to use chemical drain cleaners on Kohler bathtub drains as they can damage the finish.