How To Get Pex Pipe Out Of Sharkbite
What To Know
- If the PEX pipe is particularly stubborn, you can use a utility knife to score the pipe around the circumference of the fitting.
- If the pipe breaks, use a utility knife to cut away the remaining portion of the pipe from the fitting.
- Cut away the remaining portion of the pipe from the fitting and replace it with a new one.
SharkBite fittings offer a convenient and time-saving solution for connecting PEX pipes. However, when it comes to removing the PEX pipe from a SharkBite fitting, the process can sometimes seem daunting. This guide will provide you with a step-by-step walkthrough, along with helpful tips and tricks, to ensure a successful and damage-free removal.
Tools You’ll Need
- SharkBite Removal Tool
- Pliers
- Utility Knife
- Lubricant (optional)
Step-by-Step Removal Process
1. Gather Your Tools
Before you begin, make sure you have all the necessary tools within reach.
2. Identify the Release Collar
Locate the release collar on the SharkBite fitting. It is a thin, plastic ring located at the base of the fitting.
3. Position the Removal Tool
Align the prongs of the SharkBite Removal Tool with the slots in the release collar. Position the tool so that the prongs are facing inward towards the center of the fitting.
4. Squeeze the Handles
Firmly squeeze the handles of the removal tool to push the release collar inward. This will disengage the pipe from the fitting.
5. Pull the Pipe Straight Out
Once the release collar is disengaged, gently pull the PEX pipe straight out of the fitting. Do not twist or bend the pipe.
6. Inspect the Pipe and Fitting
After removing the pipe, inspect both the pipe and the fitting for any damage. If you notice any cracks or leaks, replace the affected part immediately.
Tips for Easier Removal
- Use a Lubricant: Applying a lubricant to the release collar can help reduce friction and make the removal process smoother.
- Cut the Pipe First: If the PEX pipe is particularly stubborn, you can use a utility knife to score the pipe around the circumference of the fitting. This will weaken the bond between the pipe and the fitting.
- Apply Heat: Gently heating the SharkBite fitting with a heat gun or hair dryer can soften the plastic and facilitate removal.
Troubleshooting Common Issues
Pipe is Stuck
- Ensure that the release collar is fully disengaged.
- If lubrication and cutting the pipe do not help, try applying more pressure with the removal tool.
Pipe Breaks During Removal
- If the pipe breaks, use a utility knife to cut away the remaining portion of the pipe from the fitting.
- Replace the pipe with a new one.
Fitting is Damaged
- If the SharkBite fitting is damaged during removal, it is essential to replace it to prevent leaks.
Final Note
Removing PEX pipe from a SharkBite fitting is a straightforward process with the right tools and techniques. By following the steps outlined in this guide, you can safely and effectively disconnect the pipe without causing damage to the components. Remember to always double-check for any issues and replace any damaged parts as necessary.
Questions We Hear a Lot
Q: Can I use pliers to remove the PEX pipe from a SharkBite fitting?
A: While pliers can be used in certain situations, it is recommended to use a SharkBite Removal Tool for the safest and most effective removal.
Q: What should I do if the pipe breaks during removal?
A: Cut away the remaining portion of the pipe from the fitting and replace it with a new one.
Q: How often should I replace SharkBite fittings?
A: SharkBite fittings are designed to last for the lifetime of the plumbing system, but they should be inspected regularly for any signs of damage or leaks.