How To Raise Your Toilet Flange After Tiling Your Floor: A Step-by-step Guide
What To Know
- Remove the nuts holding the toilet to the flange and lift the toilet off the floor.
- If there is a leak around the base of the toilet, remove the caulk and reapply it, ensuring it creates a watertight seal.
- Raising a toilet flange after tiling the floor is a fairly straightforward task that can be completed in a few hours.
Have you recently renovated your bathroom and discovered that your toilet flange is too low after tiling the floor? Don’t worry! This common issue is easily fixable with the right tools and a bit of know-how. This comprehensive guide will provide you with step-by-step instructions on how to raise a toilet flange after tiling your floor, ensuring a secure and functional toilet installation.
Materials You’ll Need
- Toilet flange extender
- Toilet wax ring
- Hacksaw or reciprocating saw
- Measuring tape
- Drill
- Masonry bit
- Hammer
- Chisel
- Caulk gun
- Silicone caulk
- Utility knife
- Safety glasses
Step 1: Measure and Mark the Flange
Measure the distance between the top of the finished floor and the top of the existing toilet flange. This will determine the height of the flange extender you need. Mark the measurement on the toilet flange extender.
Step 2: Cut the Flange Extender
Using a hacksaw or reciprocating saw, carefully cut the toilet flange extender to the desired height. Ensure the cut is clean and straight.
Step 3: Remove the Toilet
Turn off the water supply to the toilet and disconnect the water line. Remove the nuts holding the toilet to the flange and lift the toilet off the floor. Set it aside in a safe place.
Step 4: Install the Flange Extender
Place the flange extender over the existing flange and align the holes. Drill pilot holes through the extender into the floor using the masonry bit. Insert the screws provided with the extender and tighten them securely.
Step 5: Chisel Out the Wax Ring
Using a hammer and chisel, carefully chip away the old wax ring from both the toilet flange and the floor. Ensure the surfaces are clean and free of debris.
Step 6: Install the New Wax Ring
Place the new wax ring on the toilet flange, ensuring it is centered and properly aligned.
Step 7: Reinstall the Toilet
Carefully lift the toilet back into place and align it with the flange extender. Lower the toilet onto the wax ring and press down firmly. Tighten the nuts that hold the toilet to the flange.
Step 8: Caulking and Sealing
Apply a generous bead of silicone caulk around the base of the toilet where it meets the floor. Smooth out the caulk using your finger or a caulk tool. Allow the caulk to dry and cure according to the manufacturer’s instructions.
Troubleshooting Tips
- If the toilet wobbles after installation, check if the flange extender is securely fastened to the floor. Tighten the screws as needed.
- If there is a leak around the base of the toilet, remove the caulk and reapply it, ensuring it creates a watertight seal.
- If the flange is significantly below the floor level, you may need to use multiple flange extenders or consider replacing the flange altogether.
Summary
Raising a toilet flange after tiling the floor is a fairly straightforward task that can be completed in a few hours. By following these step-by-step instructions and using the right tools, you can ensure a secure and leak-free toilet installation. Remember to always wear safety glasses when working with tools and follow all safety precautions.
Common Questions and Answers
Q: Can I use a flange extender if my floor is thicker than the flange itself?
A: Yes, you can use multiple flange extenders to raise the flange to the desired height.
Q: How do I know if my flange is too low?
A: If the top of the flange is below the finished floor level, it is too low and needs to be raised.
Q: Can I use a flange extender with a bidet?
A: Most flange extenders are compatible with bidets, but it is always best to check with the manufacturer to ensure compatibility.
Q: Can I replace the flange myself?
A: Replacing a toilet flange requires more advanced plumbing skills. It is recommended to hire a licensed plumber for this task.
Q: How often should I replace the wax ring?
A: It is generally recommended to replace the wax ring whenever the toilet is removed or reinstalled.