How To Drain A Clogged Bathtub: A Step-by-step Guide
What To Know
- If the water drains slowly or not at all, the clog is likely in the drain opening.
- A drain snake is a flexible wire with a hook or auger on the end.
- To clean the drain trap, place a bucket under it and loosen the nuts that hold it in place.
A clogged bathtub drain can be a common household annoyance, especially when hair is the culprit. Here’s a comprehensive guide to help you effectively drain your bathtub and prevent future clogs.
Identify the Clog Location
Before attempting any unclogging methods, determine the location of the clog. Run water into the bathtub and observe the water flow. If the water drains slowly or not at all, the clog is likely in the drain opening. However, if the water drains slowly from the overflow opening, the clog is further down the drainpipe.
Remove Loose Hair
Start by removing any visible hair from the drain opening using tweezers or a drain snake. Pull out as much hair as possible to create a free flow path for the water.
Use a Drain Plunger
A drain plunger is a simple and effective tool for dislodging clogs. Place the plunger over the drain opening and fill the bathtub with a few inches of water. Forcefully plunge up and down to create suction and pressure that will break up the hair clog.
Pour Chemical Drain Cleaner
Chemical drain cleaners can be used to dissolve hair and other organic matter. Follow the manufacturer’s instructions carefully and wear protective gear. Pour the recommended amount of cleaner into the drain and let it sit for the specified time. Flush the drain with hot water to rinse away the cleaner and dissolved material.
Use a Drain Snake
A drain snake is a flexible wire with a hook or auger on the end. Insert the snake into the drain opening and slowly feed it down the pipe. Rotate the snake as you push it to break up the hair clog. Pull the snake out and remove any hair that has been dislodged.
Clean the Drain Trap
The drain trap is a U-shaped pipe under the bathtub that collects hair and other debris. To clean the drain trap, place a bucket under it and loosen the nuts that hold it in place. Pull out the trap and clean out any hair or other obstructions. Reinstall the trap and tighten the nuts securely.
Prevent Future Clogs
To prevent future bathtub clogs, follow these tips:
- Install a drain strainer: A drain strainer catches hair before it enters the drain.
- Clean the drain regularly: Use a drain cleaner or vinegar and baking soda solution to dissolve hair and other buildup.
- Avoid pouring grease or oil down the drain: These substances can solidify and contribute to clogs.
- Use hair removal products: Products designed to dissolve hair can help prevent it from clogging drains.
Conclusion: Banish Bathtub Clogs for Good
By following these steps, you can effectively drain your bathtub clogged with hair and prevent future clogs. Remember, regular maintenance and preventative measures are key to keeping your bathtub drains flowing smoothly.
Questions You May Have
Q: Can I use baking soda and vinegar to unclog a hair-clogged drain?
A: Yes, baking soda and vinegar can create a fizzing reaction that can help dissolve hair clogs. Pour 1/2 cup of baking soda down the drain, followed by 1/2 cup of vinegar. Let it sit for 15-30 minutes, then flush with hot water.
Q: How often should I clean my bathtub drain?
A: It depends on how frequently you use your bathtub and how much hair you shed. Generally, it’s recommended to clean the drain once a month or as needed.
Q: Can I use bleach to unclog a hair-clogged drain?
A: While bleach can kill bacteria, it’s not effective at dissolving hair clogs. Avoid using bleach in drains, as it can damage pipes.