Maximize Your Comfort: How To Use Oatey Toilet Flange Extender
What To Know
- Determine the amount of height adjustment you need by measuring the distance from the top of the existing toilet flange to the finished floor level.
- Using an Oatey toilet flange extender is a simple yet effective way to adjust the height of your toilet flange and ensure a proper installation.
- Cut the extender to the length that will reach the desired height from the top of the existing flange to the finished floor level.
If you’re facing the frustrating issue of a toilet flange that’s too low or too high, an Oatey toilet flange extender can be your savior. This handy device allows you to adjust the height of your toilet flange, ensuring a proper and secure installation. In this comprehensive guide, we’ll walk you through every step of how to use an Oatey toilet flange extender, so you can complete the job like a pro.
Tools and Materials You’ll Need
- Oatey toilet flange extender
- Tape measure or ruler
- Pencil or marker
- Hacksaw or utility knife
- Plumber’s putty
- Adjustable wrench
- Toilet wax ring
Step-by-Step Instructions
1. Measure the Distance
Determine the amount of height adjustment you need by measuring the distance from the top of the existing toilet flange to the finished floor level. The extender should be long enough to reach the desired height.
2. Cut the Extender
Use a hacksaw or utility knife to cut the extender to the measured length. Make sure the cut is clean and square.
3. Apply Plumber’s Putty
Apply a generous bead of plumber’s putty around the bottom of the extender. This will help seal the joint and prevent leaks.
4. Install the Extender
Place the extender over the existing toilet flange and press it down firmly. Adjust the height as needed using an adjustable wrench.
5. Secure the Extender
Tighten the bolts on the extender to secure it in place. Ensure the bolts are snug but not overtightened.
6. Install the Toilet
Install the toilet on top of the extended flange. Use a wax ring to seal the connection between the toilet and the flange.
7. Level the Toilet
Use a level to ensure the toilet is level both front to back and side to side. Adjust the bolts as needed to level the toilet.
Tips for Success
- Use a tape measure or ruler to ensure accurate measurements.
- Cut the extender straight and square for a proper fit.
- Apply a generous amount of plumber’s putty to prevent leaks.
- Adjust the height of the extender carefully to avoid overtightening.
- Level the toilet thoroughly to prevent rocking or instability.
Troubleshooting Common Issues
- Leaking flange: Check the plumber’s putty seal and tighten the bolts if necessary.
- Loose toilet: Ensure the bolts securing the toilet to the flange are tight.
- Uneven toilet: Use a level to adjust the feet of the toilet or shim the base.
The Bottom Line: Master the Art of Toilet Flange Extension
Using an Oatey toilet flange extender is a simple yet effective way to adjust the height of your toilet flange and ensure a proper installation. By following these step-by-step instructions, you can tackle this task with confidence and achieve a secure and level toilet. Remember, a well-installed toilet flange is essential for a leak-free and stable bathroom fixture.
Frequently Asked Questions
Q: Can I use an Oatey toilet flange extender on any type of toilet flange?
A: Yes, Oatey toilet flange extenders are compatible with most types of toilet flanges, including cast iron, plastic, and PVC.
Q: How long should I cut the extender?
A: Cut the extender to the length that will reach the desired height from the top of the existing flange to the finished floor level.
Q: How do I know if the extender is installed correctly?
A: The extender should be securely fastened to the existing flange, and the toilet should be level and stable when installed on top of it.
