Discover How To Remove The Toilet Flange Glued To The Outside Of Your Pipe In Just 5 Minutes!
What To Know
- If the flange is still stuck, use a hacksaw to cut through the glue that’s holding it in place.
- If the flange is particularly stubborn, you may need to use a heat gun or blow dryer to soften the glue.
- Removing a toilet flange glued to the outside of a pipe can be a challenging task, but it’s certainly doable with the right tools and techniques.
If you’re renovating your bathroom or replacing a toilet, you may encounter a common problem: a toilet flange that’s glued to the outside of the pipe. This can make it difficult to remove the flange and install a new one. But don’t worry, with the right tools and techniques, you can do it yourself.
What You’ll Need
- Utility knife
- Putty knife
- Hacksaw
- Chisel
- Hammer
- Safety glasses
- Gloves
Step-by-Step Guide
1. Safety First
Put on your safety glasses and gloves to protect yourself from debris and sharp edges.
2. Cut the Wax Ring
Use a utility knife to carefully cut around the base of the toilet flange, where it meets the wax ring. This will loosen the flange and make it easier to remove.
3. Loosen the Bolts
If there are any bolts holding the flange in place, loosen them using a wrench or socket.
4. Pry the Flange
Insert a putty knife between the flange and the pipe. Gently pry the flange loose, working around the entire circumference.
5. Cut the Glue
If the flange is still stuck, use a hacksaw to cut through the glue that’s holding it in place. Be careful not to damage the pipe.
6. Chisel the Flange
If the flange is still not coming loose, use a chisel and hammer to break it apart. Be careful not to damage the pipe.
7. Clean the Pipe
Once the flange is removed, clean the pipe thoroughly to remove any remaining glue or debris.
8. Install the New Flange
Apply a new layer of wax ring to the pipe and install the new toilet flange. Secure it with bolts and tighten them securely.
Tips for Success
- Use a sharp utility knife for cutting the wax ring.
- Be patient and take your time.
- If the flange is particularly stubborn, you may need to use a heat gun or blow dryer to soften the glue.
- If you’re not comfortable doing this yourself, don’t hesitate to call a plumber for assistance.
Troubleshooting
Why is my toilet flange glued to the outside of the pipe?
This can happen if the previous plumber used too much glue or if the glue was not applied correctly.
What if I can’t remove the toilet flange without damaging the pipe?
If the flange is severely glued or damaged, you may need to call a plumber to remove it.
How do I prevent this from happening again?
When installing a new toilet flange, apply the glue sparingly and make sure to clean the pipe thoroughly before applying the flange.
Takeaways:
Removing a toilet flange glued to the outside of a pipe can be a challenging task, but it’s certainly doable with the right tools and techniques. By following these steps and tips, you can successfully remove the flange and install a new one, saving you time and money.
Information You Need to Know
1. Can I use a hammer to remove the toilet flange?
Yes, but be careful not to damage the pipe.
2. What type of glue should I use to install the new toilet flange?
Use a solvent-based PVC glue specifically designed for plumbing applications.
3. How long should I wait before using the toilet after installing the new flange?
Wait at least 24 hours to allow the glue to cure completely.
